How to Clean a Car Engine

How to Clean a Car Engine

How to Clean Car Engine – Although always closed, the engine compartment of the car can also be exposed to dust and dirt. Therefore, you need to know how to clean the car engine properly so that the performance of your car is maintained.

How to Clean Car Engine Properly

So, how to clean the car engine so that performance is maintained? Here’s the review.

1. Choose a Location That is Not Directly Exposed to the Sun

The most ideal cleaning location is the garage. If the garage is too narrow and dark it will be difficult to clean the car engine. You can back the car a little, or make the hood face out of the garage. This will make the cleaning process easier.

Why can’t you wash your car in direct sunlight? Because in the machine there are parts made of rubber and plastic that can be brittle if exposed to water and directly exposed to the sun so that its work will decrease.

2. Make Sure Your Car Engine is Cold

The first step is to make sure that the engine is cold. You can do it in the morning when the car engine has not been started at all.

If the car has been used, wait about 30-45 minutes to make sure the car engine is completely cold. Cold engine conditions will be easy to clean and avoid residual electric current remaining.

The equipment for washing a car engine is slightly different from washing a car. The equipment you must have when washing a car engine is an engine degreaser to clean the oil stuck to the engine, a plastic chamois cloth to wipe the engine parts rough and a microfiber cloth for a soft coating on the engine. All need to be considered, because car engines have different characteristics in each part.\

In addition, you also need to prepare some tools and equipment such as clean water, hoses, buckets, brushes, brushes, sponges, special car soap.

3. Pay Attention to the Parts That Have Electricity

Washing with water has an unfavorable effect on parts that have an electric current, such as batteries. You can wrap the section with waterproof material or if you want to be safer, remove the battery.

This prevents short circuits in the machine and keeps you safe from the threat of electrocution.

Also Read : This is How to Clean Car Seats at Home

4. Clean Dust or Light Dirt

After making sure the car engine is cold, you can start the engine cleaning process. At this stage clean the dust or light dirt that sticks to the surface of the machine. Start by “sweeping” the surface of the machine with a brush. From the wide surface to the sidelines. At this stage you do not need to use water.

5. Clean Under the Hood

Before cleaning the engine components, you can do a clean under the hood. This section gets the first turn because it is located at the top. If this part is done later, it is very likely that the dirt will fall on the surface of the machine that has been cleaned first.

To clean this part, you can do it by using an all-purpose cleaning fluid. Clean the dirt that sticks using a brush.

Once you are satisfied with the results, rinse gently so that the water does not splash on the surface of the machine. Then dry with a microfiber cloth or chamois.

6. Use Steamer

To clean the machine, you can focus on the parts that have a large and easily accessible surface first. Use a Steamer to make it easier to reach hard-to-reach areas, even so, use a steamer with small holes to prevent water from spreading everywhere.

7. Dry Cleaned Parts

The next step is to dry it. This stage is important to prevent rust from appearing on engine components.

This step is quite easy to do by using a microfiber cloth or chamois cloth. But it’s a good idea to rinse the machine-washed surface first before drying it.

8. Check the Remaining Soap in the Machine

When finished drying with a cloth, recheck the part that is still wet and exposed to soap. If still there, wipe with a microfiber cloth to dry and not damage the surface of the machine.

9. Start the Machine

Try to dry by starting the engine. Starting the engine is great for warming up the damp parts. Do not forget to open the hood so that the remaining water evaporates easily.

Those are some ways to clean a car engine that you can apply at home. If you don’t want to bother cleaning it, visit a repair shop that provides the best service and maintenance for all parts of the car interior.

Also Read : Wash Your Motorbike Properly with this Tips

Picture of Mipacko Microfiber

Mipacko Microfiber

Mipacko is the first specialist microfiber manufacturer in Indonesia that produces high quality microfiber products for various daily hygiene needs.

We create user friendly and ergonomic products that deliver perfect results entirely chemical free.

#Clean The World, Life Better

Share :

Facebook
Twitter
LinkedIn
WhatsApp
Telegram

Follow Us :

Washing your car regularly is essential to maintain its appearance and longevity. The method you choose and the tools you use can …

Introduction Clean Lifestyle – In a world inundated with fast-paced living and ever-evolving technologies, the concept of clean living stands as a …

Introduction Effective waste management is crucial for maintaining environmental cleanliness and ensuring the sustainability of our planet. As our population grows and …